Description

LED bulkhead light is a direct replacement and energy-efficient alternative to traditional fluorescent 2D style bulkheads. These fixtures provide bright lumens output and an elegant appearance. The newest LED technology makes them an energy-efficient and maintenance-free lighting solution with a long life span of up to 50,000 hours. Waterproof resistance makes it ideal for wet locations and anywhere extra lighting is needed.

Features

♦ Endurable die-casting aluminum housing with good heat dissipation;

♦ Packed with branded LEDs and power supply to ensure product reliability and life expectancy;

♦ Saving more than 70% energy compared with traditional lighting fixtures;

♦ Adopt dust and moisture-proof structure design, with polycarbonate diffuser and stainless steel screws;

♦ Waterproof IP65 degree protection;

♦ 5 years warranty.

Specifications

Product Name	Moon LED Bulkhead Light
Model No.	LGS-BL01-24W
Power	24W
Lumen Output	2,640lm
Lumen Efficiency	110lm/w
CCT	3000/4000/5000/5700/6500K
CRI	Ra>80(Ra>90 optional)
SDCM	<5
Beam Angle θ/2	120°
Input Voltage	220-240VAC
Frequency	50/60Hz
Power Factor	>0.9
Start Time	≤0.1s
Total Harmonic Distortion(THD)	<10%
Driver Brand	Philips/Osram
Material	Aluminum housing+Polycarbonate Diffuser
Degree of Protection	IP65
Impact Protection	IK08
Dimensions	D300*H90mm
Appearance	White/Black/Grey
Installation	Wall/Ceiling Mounted
Working Tem. & Humidity	-30℃~+50℃，10%~90%R.H.
Storage Temp. & Humidity	-40℃~+70℃，0%~95%R.H.
Certificate	CE, RoHS
Light Decay Rate	Less than 3% in 6,000Hours
Lifespan	≥50,000Hrs
Warranty	5 years
Optional Functions	Dimming on Request

Optional Appearance

Installation Requirements

1. Power off before installation, and read the instructions carefully;

2. Make sure the installation material can endure the lamp weight;

3. Connect lamp wire to match power wire, and seal the joint with insulation;

4. The lamp must be installed reliably to prevent loosening and falling off.

Notice

1. Please first read the product specification carefully, and make sure the environment conforms to the specification, then it can be used;

2. Please confirm the input voltage, and frequency before use;

3. This product must be installed by professionals;

4. If there is any damage to the power wire or shell of the product, it should be taken as a defective product and do not use it;

5. Dangerous high voltage, non-professionals are not allowed to maintain the product;

6. If the external soft cable or soft wire of the light is damaged, it should be replaced by a manufacturer or service agent, or personnel with similar qualifications to avoid danger.